Structurals

Ferrous Plates – Carbon & Alloy Steel

Grades: Boiler & Pressure Vessel Quality Plates

ASTM& ASME          516/517 Grades 55, 60, 65 & 70, A 485

NACE, HIC, Sour Service, Hydrogen Service

Acc to EN 10028        P265GH, P295GH, P355GH  P275NH, P355NH, P460NH & NL

Available in normalized & TMCP conditions

Structural Steel Plates

EN 10025                   S235JR, S235J0, S235J2 (+N) S275JR, S275J0, S275J2 (+N)

S355JR, S355J0, S355J2 (+N), S355K2 (+N)

S355J2+W – Wear resistant plates

S460, S690Q, S690QL1

Alloy Steel Plates ASTM A 387 Grades 5-12, 11-22, 22-2, 9, 91 & Cr Mo, 16Mo3, 15Mo3, 13CrMo3,

Ultra High Strength/ High Yield Plates S690QL, S 690QL1, S890QL etc

Abrasion Resistant Plates, Corten Grade A/B, Chequered Plates

Available in Fine Grain, Normalised, Quenched & Tempered

Sizes: 4mm to 600mm thick, 4000mm wide and 16,000mm long

Ferrous Plates – Stainless Steel

Grades: Stainless Steel Grades 304/L, 316/L, 317, 347, 321H, 304H, 410, 420

Duplex 31803, 2205 Super Duplex 32750 , 32760. Also with PREN>35 & 41

Sizes: 1mm to 200mm thick, 3000mm wide and 12,000mm long

Non-Ferrous – Nickel Alloys & Titanium

Grades: Nickel & Nickel Alloys Gr 4400, 800, 600 C276, 904l, Ni 200,N1201

Monel, Inconel, Incoloy, Hastelloy, Alloy 20, Alloy 59, Titanium Grade 1, 2, 5, 7, 12

Sizes: 0.25mm to 75mm thick, 3000mm wide and upto 10,000mm long

Non-Ferrous – Copper and Copper Alloy Plates

Grades: OFHC Garde Aluminum Brass, Naval Brass incl NES 780, 60/40 Brass, 90/10 & 70/30 Copper Nickel, Aluminum Bronze, Admiralty Brass.

Sizes: 0.5mm to 75mm thick, 3000mm wide in rectangular, circles, squares- machined

Clad Plates

Type: Roll Bonded, Explosion Bonded & Weld Overlay

Sizes:

Base Thickness:        min 1mm – max no limit

Clad thickness:            min 1mm – max 15mm

Width: 4000mm           Length: 8000mm          Diameter: 4000mm

Weight: 30 tons per piece No minimum quantity

Standards: ASME, ASTM, API, DIN, EN, SA 264

Grades: Base: Carbon steel, Alloy steel, Stainless Steel, Copper, Aluminum

Clad: Stainless Steel, Duplex, Copper alloys, Nickel alloys, Titanium, Zirconium, and Tantalum

Structural Sections

Type: Universal Beams, Universal Columns, RSC Rolled Steel Channels Structural, Hollow Sections, RSA Rolled Steel Angles, Hot Rolled Bars, Half Rounds.

IPE, IPN, HEA, HEB, UPE, UPN, W, I

Sizes: 200mm to 1200mm example HEB 200 to HEB 1200 in various thickness

Standards: API, ASTM, EN – Euro

Grades: Carbon Steel, Alloy Steel, High Strength Steel as 275JR, 355EMZ, S355K2G3, S355J2G3, A572, API 2H 50